-
The trough cold-formed forming line is a kind of cold-formed steel machinery. It is specially used for the production of trough equipment. The metal sheet is first uncoiled, leveled and then punched, and then enters the cold-formed main machine. The trough profile required for br...
-
You should maintain good application habits when using the steel roll forming machine at ordinary times. Before starting the equipment, the mold should be sorted and cleaned to keep the mold neat. The need for regular maintenance can provide more convenient conditions for product...
-
Many processing places now pay attention to the application of steel roll forming machine. The operation method of this kind of equipment is very simple in the process of use, and the staff can master the application method in a short time. Moreover, compared with traditional equ...
-
The heating part of the steel roll forming machine includes a triangular cutting machine, a dyeing machine, a loading machine, a reversing device at the bottom of the heating furnace, a pipe drawing machine, a cooling table, etc. The cold processing part includes straightening ma...
-
1. Each pass of the cold-formed steel machine should be stressed evenly so that the wear can be balanced, thereby prolonging the service life of the roll. 2. During the rolling process of cold-formed steel machinery, the rolling stability must be considered. If the material is de...
-
The roll in the roll forming machine is a very important part of it. Its design and manufacturing features are as follows: each pass should be stressed evenly so that the wear can be balanced, thereby prolonging the service life of the roll. A basic principle of the roll forming ...
-
During the cold bending forming process of steel roll forming machine, due to the friction between the roll and the surface of the strip, the surface scratches caused by heat must be formed during the molding process of the lubricated and cooled roll. Roll forming lubricants are ...
-
For the steel roll forming machine, whether it is its roll or the horizontal wheel road, it should be effectively protected by the tube bundle. service life. Generally, the roll of steel roll forming machine is made of C12MoV material, because this material has good wear resistan...
-
When selecting roll forming equipment, we must first pay attention to the diameters of the three top rolls: it must be consistent with the type of steel that has been pre-cold-bent. The top roll has a small diameter, and because of the small contact surface, it is easy to slip du...
-
Before the steel roll forming machine starts to work, it is necessary to check the power supply, motor oil pump, pressure gauge, overflow valve, electro-hydraulic valve and jog switch of the machine to see if it is normal and whether there is any problem. Carry out processing so ...
-
There are many types of cold-formed steel machinery, and cold-formed roll forming machine is one of them. Users can customize according to specific requirements in order to meet various use requirements. At room temperature, by using cold-formed steel machinery for bending operat...
-
The pressure generated during the bending deformation combined with the residual stress existing in the strip, often causes the strip to deviate from the cold-formed steel equipment. To solve this problem, a straightening mechanism should be used at the end of the steel roll form...