Knowledge

Cold-formed steel is required in the transportation industry, automobile manufacturing industry and electric power industry. The production process of this steel is relatively special, and the production material has high strength, which can achieve better use effect after produc...

1. Before use, it is necessary to add enough lubricating oil, and check whether the parts are in good condition, whether the rotation direction of the oil pump is consistent with the specified direction, and check whether there are cracks in the processed parts, pressure pads, to...

The upper and lower rolls or leveling wheels of cold-formed steel equipment should be properly operated and maintained, otherwise there will be problems in the whole process of application. For example, dragging the motion trajectory will cause blurred motion trajectory deformati...

The benefits of the C-section steel cold bending forming machine should be realized by those who have used this equipment. This is a professional equipment with significant advantages, and the actual effect is very good in the case of forming steel. The breaking method selected i...

The key function of the C-shaped steel cold bending forming machine is that it can produce and process C-shaped steel. Before using the machine equipment, its specifications can be effectively adjusted according to its own application requirements, so that the machine equipment c...

Common problems should be ensured very well in advance before the application of the cold forming machine. Below is a brief introduction, what are the key points of general attention? First, before use, be sure to choose a flat cabinet table for placement to ensure that the eq...

The production line of cold bending forming machine requires a lot of financial resources, manpower and material resources. Therefore, before customers customize equipment, they must first consider their actual situation, whether the sales volume can support the cost of a cold be...

Color steel tile machinery. Color steel equipment tile pressing machine belongs to cold-rolled steel equipment. At present, its operation is not too complicated. Because there is a computer control system, you only need to input the size and data you need into the computer in the...

1. The side and end of the color plate are overlapped. When installing each steel plate, its edge should be lapped accurately on the previous one, and clamped with the previous one until both ends of the steel plate are fixed. A simple and effective method is to use a pair of jaw...

1. First, measure the four corners of the front and rear rows of the color steel tile machinery equipment from the height of the upper end of the shaft of the big frame, and then from the front row to the back row, find a line to straighten it, and check, the lower shaft is Not i...

Prevent people or objects from entering this dangerous area when the color steel tile machinery and equipment are running. The protective device should be easy to disassemble, and the protective device of the color steel tile mechanical equipment is usually prepared by the buyer....

The steel plates used for the walls and roofs of steel structure workshops in the modern construction industry are pressed by professional equipment, and the color steel tile machinery is also called "tile pressing machine". It has been developed in my country for more than 15 ye...