news

  • A basic principle of the roll forming process is that the strip is bent in a straight line in the longitudinal direction. However, the pressure generated during the bending deformation combined with the residual stresses present in the strip often deviates the strip from the cold...
  • In the process of selling roll forming machine equipment, it is often encountered by customers that the equipment ordered before, various problems cannot be solved after arriving at the factory, and the manufacturer cannot keep up with the after-sales service, which seriously aff...
  • The choice of the pre-embedded position of the roll forming machine is very important. It must be based on the size of the machine. The selected position must be correct and firm. During installation, it should also reach the strength of the allowable installation to ensure that ...
  • As we all know, no matter how good the equipment is, there will be some failures in the process of long-term use, so it needs certain maintenance. But we also need to pay attention that only reasonable maintenance can achieve the desired effect. So, from what aspects can the main...
  • Roll forming machine is widely used by many enterprises due to its production advantages, and it also has many advantages when using this equipment to process products. In this regard, in order to facilitate everyone's understanding, it will be introduced in detail next, so a...
  • As we all know, no matter how good the equipment is, there will be some failures in the long-term use process, so it needs certain maintenance. But we also need to pay attention that only reasonable maintenance can achieve the desired effect. So, from what aspects can the mainten...
  • 1. Do you need to consider many aspects when purchasing cold-formed steel machinery online?The online purchase of cold-formed steel machinery is to purchase the product of cold-formed steel machinery on the relevant industry website. Because it is the work of product purchase, th...
  • Cold-formed steel equipment, because it is one of the main keywords of the website, is the subject of this article, and I hope everyone can take it seriously and carry it out.1. Does the online purchase of cold-formed steel equipment have to take into account the specific applica...
  • Because it is one of the main keywords of the website, the cold-formed steel unit needs to be familiar with and understood, so that you can have a correct understanding of the product through learning, and then know how to use it reasonably and make full use of it, in order to ac...
  • In order to better ensure the safety factor of cold-formed steel equipment, in the case of feeding, full-time personnel should cooperate with forklift drivers to maintain consistency between the steel coil material and the expansion and contraction wire rope reel shaft, and then ...
  • The sound barrier forming machine has the characteristics of fast production speed, less labor required, exquisite workmanship, and no scratches on the sound-absorbing surface.Sound barriers, mainly used for sound insulation and noise reduction of roads, highways, elevated compos...
  • The focus of the development of cold-formed forming equipment, cold-formed steel originated in 1838, Russia, the United States, the United Kingdom and other countries use presses or cold-drawing machines to produce individual steel products, which is the prototype of the cold-for...