The cold rolling forming machine consists of a working mechanism and a transmission mechanism, among which: ① The working mechanism of the cold rolling forming machine is composed of a frame, rollers, roller bearings, roller adjustment mechanism, guide device, rolling seat, and ...

Cold rolling forming machine is characterized by small Moment of inertia of roll, compact structure, and can be adjusted in a wide range. The cold rolling forming machine is composed of a main transmission device and two driven transmission hydraulic support frames. The main func...

Compared with cutting and grinding processes, the Metal roll former not only has high production efficiency and saves materials, but also has high product strength and stable quality. This process is particularly suitable for processing workpieces that are difficult to cut, espec...

1. The equipment has a unique and beautiful appearance. The main body adopts a four column and three plate oil cylinder bottom structure, and the pressure system, electric control system, and hydraulic system are arranged in scientific zones; The four pillars are made of high-qua...

Various forging methods such as free forging, free forging, and special forging can be selected based on the performance specifications of steel castings Metal roller press manufacturers share the high efficiency of casting production and manufacturing, which can eliminate inter...

The workpiece is installed on a rigid box shaped workbench in front of the machine. The height of the workbench can be adjusted to fit the workpiece, and the workbench can move laterally under the reciprocating tool installed on the slider. The movement of the workbench can be ma...

(1) The temperature of each section on the sheet making machine barrel gradually increases from the feeding section to the connection between the barrel and the forming mold. (2) The temperature of the forming mold is slightly higher than the temperature of the barrel. Control...

Cold roll forming equipment has great competitiveness both domestically and internationally. The traditional cross-sectional steel is produced by hot or cold rolling, pulling and pressure forming at room temperature to produce various cross-sectional steel shapes. But with...

1、 Punching process. This is a process that is commonly used on most profiles, and many profiles are perforated. However, integrating the punching process on a rolling forming machine is not complicated, so the punching process is very common. 2、 Cutting or cutting process. On...

1、 Chain drive name is empty. Use several chains to connect all the lower shafts and drive only the lower shaft. This driving method can provide the upper shaft with greater driving adjustment capability. Chain drive has the advantage of low cost and is generally used on relativ...

Metal roofs have characteristics such as high strength, good durability, stable performance, and recyclability of materials. Metal roofs are increasingly widely used in building envelope structures. Metal roofs also bring many innovative designs due to their flexibility in applic...

Structural principle of cutting tool for metal sheet making machine uses hernia as a high-energy output laser beam, which gathers on the surface of the metal workpiece to melt and vaporize the area illuminated by the laser beam. Then, it is controlled by a computer to move the po...